Sold Out $76.50 USD
Complete quick release for the Controller 4.
- Quick release
- Top part
- 2x pins
When servicing your bar you may have to remove your quick release.
Follow these instructions.
1 - Tools needed: Punch (16mm), Hammer
2 - Remove safety ring
3 - Punch out the 2 small pins from each side holding on QR top
4 - Remove QR top
5 - Remove pins and main de-power rope. The QR is now completely removed
6 - Install De-power rope over pin holders
7 - Push down the rope in the groove around the hole so it is seated correctly
8 - Push into place QR top and hammer in pins
9 - Thread safety line back through QR and reinstall safety ring