Nitro V3 12m.... Another WOW!

General discussion

Re: Nitro V3 12m.... Another WOW!

Postby Telekiter » Mon Jan 27, 2014 9:42 am

TomW wrote:how is the rear line pressure and steering control while kite is at top end and you have to depower?
how is the kite form stability during depower and high end?
Is bar pressure similar to Element 1 13m ?

is stated range of 12-26 knots realistic for 75kg kiter?

my only complaint about the Nitro V1 14 i had was too much bar pressure. and i rode it in waves and flat all over the place.
only issue i have with Element 1 13m is that it loses 80% of steering when depowered and it wont go to edge of window.
( disclosure: riding on another bar with Y 5m up and this apparently effects the kite)
Just trying to ensure i get some improvement from those kites.

This N3 12 will replace my Element V1 13.

Thanks for the help


Hello Tom - One question, what total line length do you use on the "non- swich bar"?

/Urban.
Telekiter
 
Posts: 57
Joined: Tue Jan 24, 2012 10:01 am

Re: Nitro V3 12m.... Another WOW!

Postby queneseb » Mon Jan 27, 2014 2:20 pm

You can use any universal bar (20m, 23m 25m or more !), just have to check that every line as the same lenght.

Pay ttention to the Y position on the front line, feeling can change ! There is nothing better of Switch controller on a switch kites.. !
My Referral Code: 100485
(Use my Code 100485 when Sign up or Buying on switchkites.com and obtain benefits, Rewards + Naked women !!)
queneseb
 
Posts: 393
Joined: Thu Dec 01, 2011 9:54 pm
Location: Guadeloupe Island

Re: Nitro V3 12m.... Another WOW!

Postby Jant » Tue Jan 28, 2014 7:24 am

Did you crash or smash your kite in the water yet??. I ask this to know if the onepump sistem relased and the leading edge deflate. That happen with my nitro V2 a few times, with the one pump of the central rip.
Nitro V2 8 and 12
Jant
 
Posts: 8
Joined: Wed Nov 21, 2012 3:16 pm
Location: North Spain

Re: Nitro V3 12m.... Another WOW!

Postby Telekiter » Tue Jan 28, 2014 9:47 am

queneseb wrote:You can use any universal bar (20m, 23m 25m or more !), just have to check that every line as the same lenght.

Pay ttention to the Y position on the front line, feeling can change ! There is nothing better of Switch controller on a switch kites.. !


That is exactly why I asked TomW about the line length. If you use 25 m lines and have the Y-split 5 m from the non switch bar would be exactly the same as riding with 20 m lines and the Y-split down at the bar, on a switch-bar.

/Urban.
Telekiter
 
Posts: 57
Joined: Tue Jan 24, 2012 10:01 am

Re: Nitro V3 12m.... Another WOW!

Postby felix » Tue Jan 28, 2014 7:19 pm

Hi Jant,
Your hose's will not blow off any more.
Check the pic.
This is on all models going forward. - Jump on a nitro3 and go to the moon.
Attachments
F_nitro3UniPump.jpg
F_nitro3UniPump.jpg (106.84 KiB) Viewed 1037 times
felix
 
Posts: 436
Joined: Fri Jun 24, 2011 7:24 pm

Re: Nitro V3 12m.... Another WOW!

Postby naishdude » Tue Jan 28, 2014 7:45 pm

felix wrote:Hi Jant,
Your hose's will not blow off any more.
Check the pic.
This is on all models going forward. - Jump on a nitro3 and go to the moon.

Felix,
can these pieces be purchased and put over the "old" ones ( my methodv2 for example?)
Thx Dude :ugeek:
naishdude
 
Posts: 716
Joined: Fri Aug 12, 2011 8:13 pm
Location: Belgium/Holland

Re: Nitro V3 12m.... Another WOW!

Postby Ralph Switch Kites » Tue Jan 28, 2014 8:04 pm

Hello Dude,
The hoses will be available for purchase. We were expecting them with our last shipment, but unfortunately they did not make it. Now we need to wait until the CNY celebrations are over.
Thank you.
Ralph Switch Kites
 
Posts: 259
Joined: Sun Jun 12, 2011 8:05 am

Re: Nitro V3 12m.... Another WOW!

Postby naishdude » Tue Jan 28, 2014 11:36 pm

Ralph Switch Kites wrote:Hello Dude,
The hoses will be available for purchase. We were expecting them with our last shipment, but unfortunately they did not make it. Now we need to wait until the CNY celebrations are over.
Thank you.


Good news!!! thanks
Dude :ugeek:
naishdude
 
Posts: 716
Joined: Fri Aug 12, 2011 8:13 pm
Location: Belgium/Holland

Re: Nitro V3 12m.... Another WOW!

Postby Jant » Wed Jan 29, 2014 7:04 am

naishdude wrote:
Ralph Switch Kites wrote:Hello Dude,
The hoses will be available for purchase. We were expecting them with our last shipment, but unfortunately they did not make it. Now we need to wait until the CNY celebrations are over.
Thank you.


Good news!!! thanks
Dude :ugeek:


Thanks!!!.
Nitro V2 8 and 12
Jant
 
Posts: 8
Joined: Wed Nov 21, 2012 3:16 pm
Location: North Spain

Re: Nitro V3 12m.... Another WOW!

Postby Mariomazz » Wed Jan 29, 2014 5:11 pm

Ralph Switch Kites wrote:Hello Dude,
The hoses will be available for purchase. We were expecting them with our last shipment, but unfortunately they did not make it. Now we need to wait until the CNY celebrations are over.
Thank you.



Thank you Ralph good to know even if i don't need them; up to now, my method2 quiver, after 1 year is perfect. :D :D :D :D :D :D
SWITCH KITES Team rider - Element5 7 Element4 5,9 Element3 11 - Control V3 - Board Firewire KP1 5,11 and KHF 5,10
Mariomazz
 
Posts: 136
Joined: Tue Jan 10, 2012 12:30 am
Location: Rome

PreviousNext

Return to General

Who is online

Users browsing this forum: No registered users and 5 guests

cron